
Crete-Lease® 20-VOC-Xtra Release Agent
Crete lease will be unavailable for a while as a trip across the border is required to pick up a shipment. Could be months before I can arrange an order.
Crete-Lease® 20-VOC-Xtra Release Agent - 12.5 oz
Non-toxic, non-flammable release agent is water-based and meets rigid OSHA, EPA and the lowest VOC rules. Permits easy, stain-free removal of forms or formliners from hardened concrete without bugholes and is ordorless.
Form Material Compatibility:
-
Plywood: All Grades, Pre-oiled, Overlaid (LDO, MDO, HDO)
-
Fiberglass: Fiberglass Reinforced
-
Plastics: Expanded Polystyrene Foam*, ABS, PVC
-
Coatings: Epoxy, Urethane, Latexes
-
Elastomerics: Silicone, SBR, Natural Rubber
-
Steel
-
Aluminum
-
Wood
-
* Bead Board may require two coats
-
Product Detail:
-
Crete-Lease 20-VOC permits easy, stain-free removal of forms, formliners, pallets, etc. from hardened concrete
-
Cuts form clean-up time up to 70% when properly applied
-
Reduces bugholes on concrete surfaces
-
Doesn't interfere with adhesion of caulk, architectural coatings, paint, sealers and curing compounds on cured concrete surfaces when properly applied
-
Sprays upside down, or rightside up.
-
Permits empty container disposal in dumpsters and nonhazardous landfills
-
Still produces architectural looking concrete surfaces if over-applied
-
Is odorless
-
Meets the most rigid OSHA and EPA regulations in any state
-
Is a water based release agent
-
Applies over residual form oils on used forms
-
Helps prevent rusting of steel forms
-
Eliminates bugholes even when applied 5 times thicker than needed:
-
No staining
-
Does not cause efflorescence
-
Limitations: Crete-Lease 20-VOC separates if frozen once or if stored for more than 8 months. Vigorous stirring renews it.
-
-
Applicable Standards: Exceeds California's SCAQMD rule 1113-90 (250 g/L). "Cresset Concrete Standards", a photographic appearance guide. Corps of Engineers, "Civil Works Construction Guide Specifications," CW-03101, Section 5.3 and Section 8. Corps of Engineers, "Guide Specification Military Construction," CEGS-03300, Section 10.8.
Technical Data:
-
Coverage: 1500 sq. ft. per can
-
Type: Aeresol, Semi-drying
-
Color: White
-
Opacity: Opaque
-
Freeze Damage: Yes. Freeze Temperature: 31°F
-
Flash Point: Not applicable
-
Viscosity (centipoises): 500 @ 68°F
-
Storage Life: 8 months
-
Density: 7.8 lbs/gal
-
Odor: None
-
VOC (Volatile Organic Compounds): 100 g/l
-
Composition: A proprietary emulsion of vegetable oils in water. Contains no waxes, no silicones...no carcinogens.
Application:
-
Apply minutes, hours, or days before placing concrete.
-
Form surfaces must be clean, and dry.
-
For best results, apply an ultra-thin film.
-
Spray or wipe the release on. If runs or puddles occur, wipe them off.